Use of gas stoves

1. When using a gas stove valves, to observe the combustion conditions, should not appear yellow flame, black smoke from the flame and phenomena, such as the above phenomenon, please adjust the damper plate inside the stove until a clear blue flame up.
2. When the ignition, you should press the ignition knob, a little pause and then rotate the spark ignition to ensure reliability.
3. Check valve on the pressure gauge on the air supply pressure is consistent with the rated pressure chassis parameters on the nameplate during use.
4. Open the gas supply, check the hose with soap and valves, gas appliance intake port direction, or whether tee interface a gas leak. (The body's internal air tightness has been strictly checked at the factory, if not the body disassembly maintenance, do not detect the air tightness) is strictly prohibited open flame leak! 5. After the leak qualified boot, visual combustion conditions, the air intake throttle adjustment For optimal position (flame clear, light blue color, powerful combustion); ignition ten times, check their firing rate; ignite each burner, put a The outer ring of the burner tune small fire, which blew out after Firelight, check that the knob gas passage is closed, and the other within the burner flame is at a set time (inductive plasma flame protection 8 seconds, thermoelectric flame protection 45 sec) Off.
6. After use, turn off the safety gas valve on the pipe or gas cylinders in order to ensure safety.